RME Intelligent Audio Solutions

DIGI96 SERIES:

»DIGI96/8

»DIGI96/8 PST

»DIGI96/8 PAD

»DIGI96/8 Add-Ons

24 Bit/96 kHz Digital Audio PCI Card with 24 Bit DAC

SPDIF I/O Coaxial

SPDIF I/O Opt.

AES/EBU I/O XLR

ADAT Opt.

Stereo Analog Out

Overview

Settings Dialog

Technical Specs / Features

Unique Technologies

Pricing

OVERVIEW DIGI96/8 PRO	Top

DIGI96/8 PRO is THE professional digital audio interface for Mac or PC. Based on the DIGI96/8 it offers both 2-track SPDIF and 8-track ADAT^® interface. Additional the PRO includes professional XLR connectors for AES/EBU usage, and a flexible 24 bit/96 kHz analog output with switchable output levels of +4 dBu or -10 dBV and 112 dBA dynamic range. When using headphones the stepless volume fader control is very convenient, and in ADAT^® mode the analog output can be routed to each of the 4 stereo pairs.

RME's unique Bitclock PLL has become reference. Whatever you do with your ADAT^®: DIGI96/8 stays locked and will not loose a sample! Professionals will enjoy to change the Emphasis bit, and play back encoded AC-3 streams that are compatible to every AC-3 decoder by setting the Non-Audio bit.

The optional Expansion Boards (EXB) turn the DIGI96/8 PRO into a fully analog version, with 4 or 8 analog inputs and outputs in exceptional quality. The optional Word Clock Module (WCM) adds word clock input and output, a unique test and 'house clock' mode. And our latest TDIF Expansion (TEB) lets you use the card as TDIF interface as well.

Last but not least: The DIGI96 series includes DIGICheck, the ultimate measurement, analysis and test tool!

The DIGI96 series offers drivers for Windows 95/98 (MME, multi-DirectSound, ASIO 2.0, GSIF, DS/MME/ASIO/GSIF multi-client operation), Windows NT (MME with multi-client operation, ASIO 2.0), Windows 2000/XP (MME, ASIO 2.0, GSIF, MME/ASIO/GSIF multi-client operation), MacOS (Sound Manager and ASIO 2.0) and Linux (OSS and ALSA.)

SETTINGS DIALOG	Top

Just click on the DIGI symbol in the systray of the taskbar and the settings dialog of the DIGI96/8 PRO comes up. The clear structured, easy to understand window plus the unique informative status displays for input and output make your work with the DIGI96/8 PRO to a real pleasure. With a simple mouse click (or a freely configurable key shortcut) you gain access to the full power of your card.

RME's Settings dialog shows installed and active DIGI96^® series' cards, according to their numbering in the system. Therefore even in multicard usage you'll always know which wave device belongs to which card.

The latest drivers can be found on our Download page.

TECHNICAL SPECIFICATIONS AND FEATURES	Top

Supported sample frequencies: 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz

All settings changeable in realtime, all output options even in playback mode

Separate record- and playback circuits; complete master mode

Enhanced Full Duplex: Different sample rates at input and output possible

Mixed Mode: ADAT^® in - SPDIF out and vice versa at full synchronization

AutoSync: Automatic and intelligent master/slave clock control

Unsurpassed Bitclock PLL (audio synchronization) in ADAT^® mode

Optional Word Clock Module (WCM) provides word clock input and output

TMS (Track Marker Support): Supports CD/DAT start-IDs and the read out of CD subcode

Comes with DIGICheck: the ultimate measurement, analysis and test tool

Unique status windows for record and playback, showing mode and sample rate

Zero Latency Monitoring: Hardware bypass per track, controlled by Punch-in/out

AutoSelect searches automatically for an input with valid signal

Combined Channel Interleave/Multi Device driver compatible to almost all recording programs

Complete interrupt-sharing

Windows driver with Pentium^® optimization (quad times memory transfer)

High bus transfer rate (up to 130 MByte/s)

Digital inputs and outputs ground-free transformer coupled

Super low jitter design: < 1 ns in PLL mode (44.1 kHz, optical in)

32 bit memory transfer and 128 kB fast SRAM guarantee very low system load

Flexible superior analog 24 bit/96 kHz monitor output. Dynamic range 112 dBA

Low impedance output (75 ohm) ready for headphones, stepless output level through software faders

Speaker Protection minimizes noise during power on/off

Analog output routable to ADAT^® tracks

Digital I/O: optical (TOSLINK), coaxial (cinch), XLR, internal (CD-ROM/Sync-I/O)

Formats: SPDIF, AES/EBU (Consumer, Professional), ADAT^®

These are only some of DIGI96/8 PRO's capabilities. Click here for a complete list.

UNIQUE TECHNOLOGIES IN DIGI96/8 PRO	Top

AutoSelect
Automatic input selection by monitoring all inputs and incoming signals.
AutoSync
Intelligent clock control according to operational mode and present/desired sample rate.
Bitclock PLL
The most reliable receiver circuit for ADAT optical signal.
Enhanced Full Duplex
Simultaneous record and playback even at different sample rates.
Enhanced ZLM^®
Monitoring of the input signal, independent from clock mode and sample rate.
Hardware Selftest
Quick hardware check when booting, to improve and ensure full reliability.
Hi-Performance
Custom chip (FPGA) ensures full performance and minimal driver action.
Latency Fast Change
Change latency on-the-fly under ASIO, without manual reset or re-boot.
Mixed Mode
ADAT^® optical in - SPDIF out and vice versa.
Speaker Protection
Minimizes noise during power on/off
SyncAlign^®
Surveillance and sample accurate synchronization of all channels.
Track Marker Support (TMS)
Reads CD subcode and DAT Start IDs.
Zero Latency Monitoring (ZLM^®)
Automatic monitoring of the input signal with zero latency.

A complete overview of all the unique technologies in the DIGI96 series can be found here.

PRICING	Top

See your local distributor's website for current price information.

Home News Audio Converters Sound Cards MADI Series DIGICheck Mic Preamps
Accessories Support RME Newsgroup Company Info Purchasing Downloads Links